Mobile Repairing

Samsung B312e charging problem Samsung   B312e  is its charging problem, and this is mainly because if your charging connector is giving you problems then sooner or later your phone is going to be out of charge hence rendering you completely helpless, therefore it is highly recommended that one should get it fixed as soon as one notices any such charging issues. The very first thing that you need to do is to check voltage at the testing point 1 (as mentioned below in Figure). The voltage should be around 4.9V to 5V. other testing points are for USB connector. After removing body of your Samsung  B312e  , the very first thing that you need to do is to re-solder first pin of charging connector and check. Check the fuse and diode for possible open and short circuit. If any Charging ways is missing then make a jumper with the help of Jumper Wire. If all Charging track ways is working means then replace Charging Connector. Your problem will solved. Note: Please note ...

Samsung i8200  Galaxy S 3 mini Charging Problem Solution Jumper Ways you are facing charging problem in Samsung I8200 Galaxy S and have test all above steps to solve this problem in it. Dis assemble the phone and then look at phone for water and carbon damages. Make it clean with electronics cleaner and apply heat with heat gun to make it dry. Keep in mind heat should not be more and much because it can harm your skin and damage the mother board. So keep it in normal flow and look at the parts carefully.                                                  Track all these paths and components as shown in diagram above. all these tracks are given in different colors so that you can find out the jumper ways easily. सैमसंग  i 8200 चार्जिंग प्रॉब्लम  how to  repair samsung i8200 Galaxy S 3 mini Charging Problem Solution Jumper Ways